150.00 $
BFW – the radio modem with RS-485 interface is the radio-module working at frequency of 433 MHz and 500 MW. The radio frequency and operating power allow to use as much as possible it without any European government license. Are connected to any control device or the firing module by a 2-wire cable to the terminals of RS485 network
Are applied in two variants:
– BFWT – the transmitter, for transfer of commands for executive modules and receiving from them a response signal;
– BFWR – a receiver, for reception of commands from the transmitter and transfer of a response signal to it.
The “BROCART” Firing System supports both wire, and wireless work at the same time. The flexibility of the “BROCART” Firing System allows to use a radio modem in the easy and clear way. Actually it replaces normal cable connections between devices. The user does not need to configure the devices connected to a radio modem, it is enough to set only by means of the rotary switch a channel number on the transmitter and a receiver depending on a way of their application (see the scheme below)
Composition:
In L1 network one BFWT transmitter and up to 30 executive BFM96 and/or BFM24A modules with 30 receivers of BFWR can be used
L1 and L2 – RS485 network, is used network 2-wire NC2 cable by length from 0.1 m to 1000 m
In L2 network one BFWT transmitter and up to 30 executive BFM96 and/or BFM24A modules with 30 receivers of BFWR can be used
BFW – the radio modem with RS-485 interface is the radio-module working at frequency of 433 MHz and 500 MW. The radio frequency and operating power allow to use as much as possible it without any European government license. Are connected to any control device or the firing module by a 2-wire cable to the terminals of RS485 network
Are applied in two variants:
– BFWT – the transmitter, for transfer of commands for executive modules and receiving from them a response signal;
– BFWR – a receiver, for reception of commands from the transmitter and transfer of a response signal to it.
The “BROCART” Firing System supports both wire, and wireless work at the same time. The flexibility of the “BROCART” Firing System allows to use a radio modem in the easy and clear way. Actually it replaces normal cable connections between devices. The user does not need to configure the devices connected to a radio modem, it is enough to set only by means of the rotary switch a channel number on the transmitter and a receiver depending on a way of their application (see the scheme below)
Composition:
PyroPlayer BFC – is intended for storage, automatic execution a time code of the Fire File (.CSV) and synchronous reproduction of the audio-file of a phonogram of display fireworks. This is the same Master BFC, but with limited functions.
It Provides:
Composition:
BFM24С – the firing module on 24 firing users. Control of the module and start-up of pyroelements only via the BFD24 device from theMaster BFC or from PyroPlayer BFP on RS485 network or a radio channel. Power supply (24V) and control signal of RS485 network come to the module from the control device BFD24. Universal AC4 cable is for this purpose applied. The module is installed in close proximity to fireworks. Each executive module of “Brocart” firing system is identified by the unique ID code, with digital value from 1 to 199. BFM24С – the module on 24 firing cues for run pyromusical fireworks only via theBFD24 device from the Master BFC or from PyroPlayer BFP on RS485 network or a radio channel.
It is based on the Principle of the “BROCART” firing system
It Provides:
Composition:
