Похожие товары
-
NC2 — Кабель сетевой
В корзину -
650.00 $
BFM24A — the firing module on 24 cues for run fireworks on commands from the control computer and Master BFC or a PyroPlayer BFPon RS485 network or a radio channel. The module is installed in close proximity to pyroelements. BFM24A is a standalone 24-channel module for run fireworks from the Master BFCor a PyroPlayer BFP on RS485 network or a radio channel. Is based on the Principle of the «BROCART» firing system
It Provides:
- connection to the panel 24 pyroelements grouped in 4 address groups — on 6 cues in everyone;
- use of two operation modes of the panel:
— a checking regime of the connected pyro-elements — «Test»;
— ready mode and start-up of a pyro-element — «Fire».
Important: switching of the modes is made by clicking the corresponding button «Test» or «Fire». The module is automatically transferred to the «Test» mode at each its inclusion and switching off
- control of availability of igniter and operability of the line:
— via the computer interface;
— or to LED indicators on the case of the module.
Composition:
- key switch of turning on / off of the module;
- terminals for connection of the 2-wire network cable NC2(RS485) or a radio modem BFW;
- 48 terminals for connection of igniters, on 12 terminals in 4 groups;
- buttons for switching the module in «Test» and «Fire» modes;
- LED indicators of control of the connected igniters;
- built-in rechargeable battery of a power supply 12v 7Ah;
- the connector for connection of the external battery of a power supply and charging of the internal battery;
- shockproof, dustproof and moisture-proof case
- dimensions: 300х200х170
- weight – 2kg
BFM24A — Исполнительный модуль
В корзину -
150.00 $
BFW — the radio modem with RS-485 interface is the radio-module working at frequency of 433 MHz and 500 MW. The radio frequency and operating power allow to use as much as possible it without any European government license. Are connected to any control device or the firing module by a 2-wire cable to the terminals of RS485 network
Are applied in two variants:
— BFWT — the transmitter, for transfer of commands for executive modules and receiving from them a response signal;
— BFWR — a receiver, for reception of commands from the transmitter and transfer of a response signal to it.
The «BROCART» Firing System supports both wire, and wireless work at the same time. The flexibility of the «BROCART» Firing System allows to use a radio modem in the easy and clear way. Actually it replaces normal cable connections between devices. The user does not need to configure the devices connected to a radio modem, it is enough to set only by means of the rotary switch a channel number on the transmitter and a receiver depending on a way of their application (see the scheme below)
Composition:
- inclusion toggle-switch;
- channel switch
- terminals for connection 2-wire of RS485 network;
- LED indicators of turning on of the modem and reception-transmission of a signal
- the internal battery of a power supply of the device — 12V (time of continuous operation of the rechargeable battery in the mode of reception-transmission of signals — 3 hours);
- the connector for connection of the charger;
- dimensions: 170х80х35
- weight — 300г
BFWT — Радио-передатчик
В корзину -
1,900.00 $
BFM96M — the combined devaice: Control panel & Firing module (two in one) on 96 firing cues. It is used as the Control panel for run of fireworks manually directly from the panel, or as the Firing Module as a part of an digital firing system «BROCART» on commands from the control computer and the Master BFC or the PyroPlayer BFP by RS485 network or by radio channel.The panel — module allows to control remotely the pyrotechnic elements set at distance up to 300 m from the operator.
The BFM96M is based on the Concept and the Principle of the «BROCART» firing system
It Provides:
- connection to the panel to 16 address groups on 6 firing cues in everyone, by means of the universal cable AC4-4pin and contact boxes AB6;
- the choice of Address group of cues clicking the button with the corresponding number of group (when using in the manual mode)
- LED indicator control of the selected group (when using in the manual mode)
- consecutive or selective start-up of pyroelements from the selected Address group of cues (when using in the manual mode), the number of possible start-up from each contact box (Address group) – 6 cues;
- use of two operation modes of the panel:
— a checking regime of the connected pyro-elements — «Test»
— ready mode and start-up of a pyro-element — «Fire». - control of availability of igniter and operability of the line:
— via the computer interface;
— or additional special device «ModuleTester» BFMT - the maximum removal of pyroelements from the paneli-module:
— at a power supply from the internal battery — 100 m;
— when using the external battery (24v) — 300 m
Composition:
- button of turning on of the panel;
- mode switch «Test — ON — Fire»;
- manual on / off switch;
- buttons for selecting the address group of cues — 16 pcs .;
- buttons firing cues — 6pcs.
- 16 GX16-4pin connectors for connection of contact boxes AB6 of address groups of cues;
- terminals for connection of the 2-wire network cable NC2(RS485) or a radio modem BFW;
- digital voltage indicator of internal batteries;
- LED board of technological serviceability check of electronic components of the panel;
- the USB connector for connection of the PC;
- switch with a board of ID number of the module;
- two independent rechargeable batteries 12v 7Ah;
- the connector for connection of the external battery of a power supply;
- two connectors for charging of internal accumulators;
- shockproof, dustproof and moisture-proof case
- dimensions: 300х200х170
- weight – 10kg
BFM96M — Цифровой пульт-модуль управления
В корзину