Firing module
Showing all 4 results
-
650.00 $
BFM24A – the firing module on 24 cues for run fireworks on commands from the control computer and Master BFC or a PyroPlayer BFPon RS485 network or a radio channel. The module is installed in close proximity to pyroelements. BFM24A is a standalone 24-channel module for run fireworks from the Master BFCor a PyroPlayer BFP on RS485 network or a radio channel. Is based on the Principle of the “BROCART” firing system
It Provides:
- connection to the panel 24 pyroelements grouped in 4 address groups – on 6 cues in everyone;
- use of two operation modes of the panel:
– a checking regime of the connected pyro-elements – “Test”;
– ready mode and start-up of a pyro-element – “Fire”.
Important: switching of the modes is made by clicking the corresponding button “Test” or “Fire”. The module is automatically transferred to the “Test” mode at each its inclusion and switching off
- control of availability of igniter and operability of the line:
– via the computer interface;
– or to LED indicators on the case of the module.
Composition:
- key switch of turning on / off of the module;
- terminals for connection of the 2-wire network cable NC2(RS485) or a radio modem BFW;
- 48 terminals for connection of igniters, on 12 terminals in 4 groups;
- buttons for switching the module in “Test” and “Fire” modes;
- LED indicators of control of the connected igniters;
- built-in rechargeable battery of a power supply 12v 7Ah;
- the connector for connection of the external battery of a power supply and charging of the internal battery;
- shockproof, dustproof and moisture-proof case
- dimensions: 300х200х170
- weight – 2kg
BFM24A – Firing module
Add to cart -
500.00 $
BFM24B – the firing module on 24 firing users. Control of the module and start-up of pyroelements only via the BFD24 device from theMaster BFC or from PyroPlayer BFP on RS485 network or a radio channel. Power supply (24V) and control signal of RS485 network come to the module from the control device BFD24. Universal AC4 cable is for this purpose applied. The module is installed in close proximity to fireworks. BFM24B – the module on 24 firing cues for run pyromusical fireworks only via theBFD24 device from the Master BFC or from PyroPlayer BFP on RS485 network or a radio channel.
It is based on the Principle of the “BROCART” firing system
It Provides:
- connection to the module 24 igniters grouped in 4 address A1, A2, A3, A4 groups – on 6 cues in everyone;
- use of two operation modes of the panel:
– a checking regime of the connected pyro-elements – “Test”;
– ready mode and start-up of a pyro-element – “Fire”. - control of availability of igniter and operability of the line:
– via the computer interface;
– or to LED indicators on the case of the module.
Composition:
- toggle-switch of turning on of the module;
- the switch in the “Test” and “Fire” modes;
- terminals for connection of the 2-wire network cable NC2(RS485) or a radio modem BFW;
- 48 terminals for connection of igniters, on 12 terminals in 4 groups;
- LED indicators of control of the connected igniters;
- the connector for the special test monitoring device of the connected igniters;
- two GX16-4pin of the connector for connection of universal AC4 cable;
- the connector for connection of the external battery of a power supply, for a case of autonomous use of the module;
- dimensions: 300х200х170
- weight – 10kg
BFM24B – Firing module
Add to cart -
500.00 $
BFM24С – the firing module on 24 firing users. Control of the module and start-up of pyroelements only via the BFD24 device from theMaster BFC or from PyroPlayer BFP on RS485 network or a radio channel. Power supply (24V) and control signal of RS485 network come to the module from the control device BFD24. Universal AC4 cable is for this purpose applied. The module is installed in close proximity to fireworks. Each executive module of “Brocart” firing system is identified by the unique ID code, with digital value from 1 to 199. BFM24С – the module on 24 firing cues for run pyromusical fireworks only via theBFD24 device from the Master BFC or from PyroPlayer BFP on RS485 network or a radio channel.
It is based on the Principle of the “BROCART” firing system
It Provides:
- connection to the module 24 igniters grouped in 4 address A5, A6, A7, A8 groups – on 6 cues in everyone;
- use of two operation modes of the panel:
– a checking regime of the connected pyro-elements – “Test”;
– ready mode and start-up of a pyro-element – “Fire”. - control of availability of igniter and operability of the line:
– via the computer interface;
– or to LED indicators on the case of the module.
Composition:
- toggle-switch of turning on of the module;
- the switch in the “Test” and “Fire” modes;
- terminals for connection of the 2-wire network cable NC2(RS485) or a radio modem BFW;
- 48 terminals for connection of igniters, on 12 terminals in 4 groups;
- LED indicators of control of the connected igniters;
- the connector for the special test monitoring device of the connected igniters;
- two GX16-4pin of the connector for connection of universal AC4 cable;
- the connector for connection of the external battery of a power supply, for a case of autonomous use of the module;
- dimensions: 300х200х170
- weight – 10kg
BFM24C – Firing module
Add to cart -
1,700.00 $
BFM96A – the firing module on 96 cues. It is used only as the Firing Module as a part of an digital firing system “BROCART” for start of pyroelements on commands from the control computer and the Master BFC or a PyroPlayer BFP by RS485 network or by radio channel. Use of basic devices (contact boxes AB6 and universal cable AC4) allows to manage remotely the pyrotechnic elements set at distance up to 300 m from the module. BFM96A – the firing module on 96 cues for run pyromusical fireworks from the Master BFC or from PyroPlayer BFP on RS485 network or a radio channel,
It is based on the Concept and the Principle of the firing system “BROCART”
It Provides:
- connection to the panel to 16 address groups on 6 firing cues in everyone, by means of the universal cable AC4-4pin and contact boxes AB6;
- use of two operation modes of the panel:
– a checking regime of the connected pyro-elements – “Test”
– ready mode and start-up of a pyro-element – “Fire”. - control of availability of igniter and operability of the line:
– via the computer interface;
– or additional special device “ModuleTester” BFMT - the maximum removal of pyroelements from the paneli-module:
– at a power supply from the internal battery – 100 m;
– when using the external battery (24v) – 300 m
Composition:
- button of turning on of the panel;
- mode switch “Test – ON – Fire”
- 16 GX16-4pin connectors for connection of contact boxes AB6 of address groups of cues;
- terminals for connection of the 2-wire network cable NC2(RS485) or a radio modem BFW;
- digital voltage indicator of internal batteries;
- LED board of technological serviceability check of electronic components of the panel;
- the USB connector for connection of the PC;
- switch with a board of ID number of the module;
- two independent rechargeable batteries 12v 7Ah;
- the connector for connection of the external battery of a power supply;
- two connectors for charging of internal accumulators;
- shockproof, dustproof and moisture-proof case
- dimensions: 300х200х170
- weight – 10kg
BFM96A – Firing module
Add to cart